Should you tip a repairman if he comes to give a free estimate on home repair work?

Davida Gisriel: No, that is just part of the job. They do not expect to get any tips.

Benny Stehno: I would say no! He is there to try to get your business, so he should be impressing you with his product and price for repair. If the work was done by him and you were satisfied with the end result, than I would tip him.

Jana Sakasegawa: no no no no no!

Emile Okafor: Taking a guess that the filters are clean, every thing is good on the inside belts, filters Etc.Are you sure the compressor is running ?How cold is it outside ?Are you calling for cooling or heating.If it is below 65 Degrees ,outside, your compressor may run but will not circulate enough refrigerant,The pressure to circulate the refrigerant is too low, due to the cool air on the outside condenser coil.To add to the condition you may also be low on the Refrigerant charge to begin with...Show more

Tatiana Evanosky: sorry i have had same problem but i know of no safe way to disable th! e ink warning

Marty Tichnell: FREE means FREE estimate. You are not obligated to give him/her tips unless you want to. Your decision buddy.

Idell Dufort: No. Doing estimates is part of the job.

Patrick Bitsui: listen to trouble.

Kenneth Thuesen: I am not real great with printers but I have worked on a few problems. You didn't say what type of printer or brand. With my ink jet it is usually a matter of a dirty jet. Cleaning the cartridge only sometimes works. Be care since it is ink and it is messy. My sister had the same symptom where they had plenty of ink but the printer said it was empty. She said the tech told her the cartridge has a hole for air to allow the ink to flow and that was plugged up. That hole is how the printer also tells if there is ink? I think...But sorry, I can't tell you where that hole in the cartridge is located on yours. Or if your printer even uses one. ...Show more

Pamela Meno: Interesting answers so far.Would like ! some input from the repair dudes that hang out in here.

! Stephnie Patout: Absolutely not. It is not expected.

Damaris Weiler: It's your choice if you want to give him a tip or not.http://www.handyman-business.com/Home-Repair-And-R...

Toya Braskett: The door Stop is attached to the door Jamb which the hinges are mounted to. Door casing transitions from the jamb to the wall surface around the door way.

Jodie Capella: I have a social studies essay and it's due tomorrow!! I typed it all up and i turned on my printer. i only need the black ink,i have plenty of black ink,but my computer keeps sayin that the cyan ink is out and it wont print anything without it! its too late 2 go 2 radio shack :S ugghhhh! any help? Bonus Question: Will putting water in the hole where the ink lies help??

Coleen Carignan: What should the pressure be on the freon? And also would the voltage play a part in the fan running but the compressor not doing its job?

Ismael Sixon: It depends upon where you are as many things have dif! ferent names in different places. In my area the innermost piece of molding is usually about 3/8 of an inch thick by about 1 1/4 inches. It is called a door stop and the door hits it as a stopping point. On dark room and sound proof doors you might also put one on the bottom. The door stop is attached to the door jam. The door jam is typically fit square to the door and shimmed into the sometimes not square opening.Weather stripping is made with a peel and stick backing. This should go against the door stop on the top and non hinge side of the door and the door will close against it. But on the hinge side the weather stripping should go on the jam. This helps to prevent the weatherstripping from being scraped off as the door closes (if it were put on the door stop on that side.) Weather stripping could be either closed cell or open cell foam depending upon the clearance available. Weather stripping that is too thick will make the door hard to close and tend to "sp! ring" the hinges, eventually making them loose....Show more

Wilbu! r Marksberry: NO

Granville Stray: As a repair dude, I would hope you start a trend. Right now, I don't get tips, but will get a cold drink and even vegetables from gardens.

Nell Dipiero: The part that makes a seal with weather stripping. They might be on the side as well.

Curtis Josef: I have the Epson Stylus C88

William Vickerman: Why not? I mean, he came all the way to your house... for free.ADDITION: Just because it's part of the job, & not expected, doesn't mean it's not nice. You could turn his day around with this random act of kindness. Even if it just $5.

Marcia Cheathan: Are you talking about a heat pump during winter or an a/c in summer? Either way there are too many variables to answer your question on refrigerant pressures. Such as outside temperature, inside temp, humidity etc… As for the voltage, both the compressor and condenser fan motor run on the same voltage. If a customer asked me that the first thing I would think of is ! a shorted run capacitor. However, your question is a bit vague.30 yrs hvac exp...Show more

Hal Palowoda: I don't know if that would work, but why not transfer everything onto a disc and print it out first thing in the morning at school?

Lia Argall: a door jamb [jam]

Billie Bratchett: First determine if the compressor is even running. if its running, whats important is the amp draw. if its not, determine why, then get it running. That may mean the compressor side of the dual run capacitor has failed. That may mean there's an issue inside the compressor. When its electrically happy, THEN worry about the refrigerant pressures and the subcooling/superheat differentials. If any of this is Greek to you, call one of my brethren. Don't try monkeying with it if you don't know what you are doing....Show more

Keven Drumgole: Agreed. Units come from the factory with a "dual" capacitor, although it has 3 polls; one runs the fan motor (fan), one runs the compresso! r (Herm) and the 3rd is a common poll (C) that they both use. It's poss! ible that the compressor poll is out. You can check the compressor wires and the compressor connection to see if any have burnt off. If neither, then it's time to get a tech.

Stanton Villao: You can call it " Door Frame Cornish " or " Door Frame Skirting " Good Luck !

Scot Sepulbeda: Email the essay to a friend and have them print it for you. Go over and pick it up.

Troy Staton: 1) i dont have a disc 2)i have social studies 2nd period 3)theres no where in school to do it at

Kris Bozelle: Hi,Nope. If he was any kind of repairman he wouldn't accept it. The question reminds me of the movie "My Blue Heaven" starring Steve Martin.S1lent

Sang Hanafin: Usually when I go to do an estimate, It's free.If I get the job...that alone is my reward.I am always grateful to a bonus but in my 35 years of handymaning have never received a tip for an estimate. If i did receive a tip, i'd love it.I usually only tip people in life that have to clean-up after me, ! like waitresses, bartenders, maids and barbers....Show more

Marylee Lucks: Yes because if he gets the job he will do it better. It's just good customer relations.

Comment protéger votre chat ou chaton des parasites

Comment protéger votre chat ou chaton des parasites

Nettoyez votre environnement à fond et souvent. Il est essentiel d’éliminer les puces des environs pour éviter qu’elles ne vous dérangent, vous et votre chaton ou chaton. Nettoyez les tapis, les meubles rembourrés, les fissures et les crevasses du plancher pour aspirer les Å"ufs et les puces vivantes. Jetez le sac de l’aspirateur et/ou lavez sa cartouche. Utilisez des insecticides sans danger pour les chats dans la maison, sur les meubles et partout où votre chat peut se promener. Gardez votre chat à l’écart des endroits sensibles comme les endroits de préparation des aliments dans la cuisine, les berceaux pour bébés et à l’extérieur.

Nourrir ou injecter un produit à long terme. Le produit du Programme contient un inhibiteur du développement des insectes. Il y a un comprimé qui p! eut être donné une fois par mois (pour les chiens ou les chats), et une injection pour les chats qui est bonne pendant six mois.

Vaporisez votre chat avec des traitements antipuces et antitiques une fois par mois. Vous pouvez utiliser une bombe aérosol ou un flacon pompe. Choisissez un produit efficace recommandé par un vétérinaire qui est sans danger pour l’âge de votre chaton. Gardez à l’esprit que ces traitements contiennent différents ingrédients et qu’ils ne sont pas tous sûrs ou efficaces.

Rincez votre chat avec une trempette une fois par mois. Appliquer le produit de rinçage dans un endroit bien aéré et selon les directives spécifiques du fabricant et de votre vétérinaire. Celles-ci sont un peu moins fréquentes et impliquent de faire tremper le chat en entier. Si votre chat n’est pas coopératif avec le bain, alors vous voudrez probablement éviter cette méthode et essayer le collier ou la méthode topique.

Gardez votre an! imal à l’intérieur. Il s’agit d’une mesure de protecti! on globale pour votre chaton ou chat afin de réduire les risques d’infections parasitaires internes.

Protégez votre chaton ou chaton contre la toxoplasmose en évitant les aliments crus. Donnez-lui de la nourriture commerciale pour chats au lieu de matières premières ou d’os. Ne laissez pas votre chat fouiller dans les ordures, errer à l’extérieur où il pourrait manger ou chasser des objets sans surveillance, et/ou boire du lait non pasteurisé.

Nourrissez votre chat avec de la nourriture commerciale pour chats. Cela réduira les risques que les parasites s’introduisent dans le régime alimentaire.

Se fixe sur un collier de puces et de tiques. Pour savoir si le collier est bien ajusté, vous devriez pouvoir glisser deux doigts entre le collier et le cou du chat. Utilisez des ciseaux pour couper l’excédent de collier une fois qu’il est bien ajusté afin que le chaton ou le chat ne le mâche pas. Examinez périodiquement la zone sous et a! utour du collier à la recherche de signes d’irritation. Si vous remarquez un problème, vous avez probablement besoin d’utiliser un autre produit comme le produit topique ou le shampooing.

Faites analyser les excréments de votre chaton ou de votre chaton chez le vétérinaire. Un test fécal peut déterminer la présence de parasites intestinaux comme les vers ronds, le cryptosporidium ou les coccidies.

Appliquez ou donnez des médicaments contre les vers du cÅ"ur à votre chat. Les tests et la médecine préventive sont les seuls moyens d’éliminer les vers du cÅ"ur chez les chats. Demandez à votre vétérinaire de tester votre chaton ou chaton avant de le mettre sous traitement préventif afin de vous assurer qu’il n’est pas déjà infecté.

Appliquez un shampooing contre les puces et les tiques à votre chat une fois par mois. Choisissez votre shampooing avec soin. Certains shampooings prétendent tuer les parasites externes, mais ils ne le! font pas vraiment â€" ils ne font que les noyer ! De plus, certains de! s shampooings les plus forts peuvent être toxiques pour les jeunes chatons ou sécher excessivement sur la peau ou le pelage d’un chat.

Nettoyez souvent les bacs à litière. En plus de changer régulièrement le matériel de litière dans les boîtes, vous devez vous assurer que les matières fécales sont éliminées de façon appropriée. Faites incinérer, rincer ou enlever rapidement la litière jetée de la maison. Ne laissez pas d’autres animaux domestiques utiliser le bac à litière. Utilisez de l’eau bouillante pour nettoyer la litière elle-même.

Appliquer des insecticides topiques. Utilisez un produit efficace, recommandé par un vétérinaire et adapté à l’âge de votre chaton. Sachez que les différentes taches sur les produits contiennent des ingrédients actifs différents, qui ne sont pas tous efficaces ou sûrs.

What flowers would make a beginner garden look good ?

Alexis Reyer: Sunflowers, zinnias, and morning glories would be perfect for those conditions. They are very easy to grow and are very impressive looking. Day lilies too.

Booker Moros: daylilies, hostas, annuals

Percy Seiger: coreopsischelonedianthusechinaceagaillardiageraniumornamental grasseshemerocallis (daylilies)heucheraliatrismonardanepetapeonypenstemonperovskiarudbeckiasalviasedumThis is my short list of no nonsense easy to grow, low maintenance, long-blooming perennials. All are full-sun (6hrs or more). Use google to look up images and find what you like. Plant them in groupings of 3 or more, always using odd numbers in a grouping. Wrap the groupings around each other to some degree to provide interest. Maintenance for all of these should include fertilizing 2-3 times per year with basic fert like miracle grow 10-10-10, clipping off spent blooms will promote more blooms but you don't have to do that, and trimming them all to the ground in late fa! ll after they've gone dormant. Also, a layer of wood mulch 2-3 inches thick will help a ton. Usually watering once per week is enough, but skip if you've had an inch or more of rain within the past week. Just check the soil every couple of days and if it is dry and hard give them some water. You should be able to dig your fingers in to the soil fairly easily.Also those are all botanical names. Google is your friend....Show more

Donnell Nocella: For a beginner i might truthfully pass with annuals. they provide extra colour for an prolonged era. each and every Spring you clean out your beds and start up over. consequently the weeds are not getting of venture to get great. you will do relating to an identical weeding no be counted what you chosen yet wiping the full mattress clean is plenty much less complicated. What to plant? start up with a mattress of untamed vegetation, basic to plant, basic to look after. If weeds are not a concern then purely mow them down co! me Fall, leaving the reducing lay on the mattress, and watch w! hat happens come Spring. Yep, you're starting to be extra vegetation than you be attentive to what to do with. If no longer, purely stitch some extra seeds in between them..... by making use of then you relatively are starting to be long gone to 3 flower shows and have a good thought of what you like your backyard to look like. of direction the individuals who have been struggling with to appreciate your annuals isn't struggling with yet what the heck.........Show more

Kristina Brockwell: For quick and lasting color, consider annuals.

Salvatore Walls: IrisDaylilyAsiatic Lily, Oriental LilyZinniaMarigoldEchinaceaCosmos...Show more

Comment activer les connexions à distance SQL 2008 Express SQL Express

Comment activer les connexions à distance SQL 2008 Express SQL Express

Cliquez sur Appliquer, puis revenez à l’onglet Connexion et cliquez sur Démarrer, puis sur Ok.

Sous l’ongletService, passez du mode Démarrage au mode Automatique.

C’est tout simplement cela, une fois que TCP/IP est activé et que le navigateur SQL est en cours d’exécution, vous pourrez voir l’instance à partir d’autres machines sur votre réseau.

OpenSQL Server Configuration Manager dans le menu Démarrer et sélectionnez Services SQL Server

Comme SQL 2008 Express s’installe par défaut avec le service SQL Browser et SQL Agent désactivés et que le service de navigateur écoute les requêtes entrantes pour les ressources Microsoft SQL Server et fournit également des informations sur les instances disponibles pour le réseau, nous! devons l’activer et le démarrer.

Cliquez avec le bouton droit de la souris surSQL Server Browser et sélectionnez Propriétés

Comment désactiver les sons environnementaux dans la Médaille d’honneur

Comment désactiver les sons environnementaux dans la Médaille d’honneur

Assurez-vous que « console » est activé. Allez dans Options

Whats wrong with my garden?

Tomeka Hameen: gardening is a learning experience for life . spray your plants with Epsom salts in water ,it contains minerals , when watering, soak the soil and not the plants . we all make mistakes

Bud Espenshade: I am 66, I have been gardening over 30 years. I have killed a lot before I knew what I was doing. DO NOT FEEL BAD! It's not like you were babysitting your brother and he died or something. They are plants and I think it stinks that your family is not helping you to learn how to take care of them. You did what everyone on Earth does, you thought plants are fish and watered too much. Believe me I have plants in tiny 3oz cups in 90 degree weather and I water them every 2 or 3 days and they live just fine. Plants are stronger than you think. 1" of water a week. Water in the morning and don't water the leaves, water the soil. Because the fungus got a hold it will infect everything. You best hope is to let it all dry out good and hope some plants s! urvive. I remember the first time I fertilized the grass and it got all burnt because I used too much. It happens to all of us, we are not born with the knowledge, we must learn. If you family gives you grief then ask them why they didn't tell you that you were watering too much....Show more

Dewey Heersink: Take samples of the problem leaves/stems/etc and zip them up in plastic bags. Bring them to your local privately-owned nursery the same day you collect the samples. A privately owned nursery will likely have employees who are gardening experts and not just minimum wage employees who like plants. (Larger chain stores rarely have gardening experts on staff.) Anyhow, the employees will happily answer your questions for free (and possibly offer to sell you a remedy).Alternatively, you can call the Agricultural Extension Office for your state. They usually have Master Gardeners or other experts who will identify the problem for you, too (for free).One more though! t: Are you watering overhead? And what time of day? When yo! u water, try to wet the soil UNDER the plant, NOT the leaves. For instance, let the hose lie in the bed and soak the soil so it can travel to the plants' roots. If you must get the leaves wet, try to water early in the day so that plant can dry out. This will help prevent fungus.And remember...life is about learning. We learn as we go. If some plants die your first year you'll learn from the experience and hopefully less plants will die the second year and so on.Enjoy! :)...Show more

Comment nettoyer un étui Speck FabShell pour iPhone

Comment nettoyer un étui Speck FabShell pour iPhone

Retirez votre appareil de l’étui

Après le brossage, rincer le boîtier à l’eau.

Prends une brosse à dents.

Faites de même avec les deux côtés et le dessus.

Commencez à brosser le dos. Brossez doucement la brosse à dents dans un mouvement de haut en bas.

Procurez-vous un sèche-cheveux et utilisez-le pour sécher le tissu.

Procurez-vous une petite quantité de détergent liquide.

Prends la brosse à dents et mets du détergent dessus.

Essuyez l’intérieur du plastique dur à l’intérieur du boîtier avec du papier de soie.

Pour commencer, essuyez la saleté avec un mouchoir en papier. Après, tremper l’étui dans l’eau.